Brother Toner TN2150

於 Laser Printer :Brother consumables

•  HL-2140, HL-2150N, HL-2170W,
•  DCP-7030 , DCP-7040 ,
•  MFC-7340 , MFC-7450 , MFC-7840N
•  Capacity : 2,600 pages @ 5% coverage

訂購及貨運流程:

3C Company

電話 : 31881911 , 31881466
傳真 : 31881955

Whatsapp  : 6538 1911
電郵地址 : 3c@3c.hk

(*) 辦公時間 : 9:00am - 6:00pm (Mon - Fri)

星期六,日及公共假期休息

地址 : 九龍荔枝角青山道 479 號 麗昌工廠大廈3字樓3031室

Rm 3031 , 3/F Lai Cheong Factory Building,479 Castle Peak Road,Lai Chi Kok,Kowloon.

( 荔枝角地鐵站B1 出口  Lai Chi Kok MTR B1 )

放大本公司地圖

.

貨運流程 

一般工商區 (速遞-貨到付款)

貨到付款 - 支票 / 現金 --- 支票抬頭請寫 " 3C Company "

非工商區 ( 需要先匯款再安排郵寄  順豐 / 宅急便 送貨)

Name of Bank :

HSBC : 112-472-576-838

• Replace the toner cartridge

  Please follow the steps below to replace the toner cartridge:
  
  

  The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the Toner Cartridge and not the drum unit. If you want to know their difference, refer to "What is the difference between the toner cartridge and the drum unit?"

  
  > For the order number (Order No.) of the toner cartridge, please click here to see the Consumables & Options page.
  
  NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
  
  

  Do NOT use flammable substances near the machine. Do NOT use any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.

  

  After you have just used the machine, some internal parts of the machine will be extremely hot. When you open the front or back cover of the machine, DO NOT touch the shaded parts shown in the illustration.

  

  1. Open the front cover.

  

  2. Slowly take out the drum unit and toner cartridge assembly.
     
     
     
     
     Hold your Brother machine with one hand and hold the drum unit with the other hand. Then, pull the drum unit toward you and lift it up.
     
     
     

  • We recommend that you put the drum unit and toner cartridge assembly on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.
    
  • To prevent damage to the machine caused by static electricity, DO NOT touch the electrodes shown in the illustration.

  

  3. Push down the green lock lever and take the toner cartridge out of the drum unit.

  DO NOT put a toner cartridge into a fire. It could explode, resulting in injuries.

  Discard the used toner cartridge according to local regulations, keeping it separate from domestic waste. Be sure to seal up the toner cartridge tightly in a suitable bag so that toner powder does not spill out of the cartridge. If you have questions, call your local waste disposal office.

  • Brother strongly recommends that you DO NOT refill the toner cartridge provided with your machine. We also strongly recommend that you continue to use only Genuine Brother Brand replacement toner cartridge. Use or attempted use of potentially incompatible toner and/or cartridge in the Brother machine may cause damage to the machine and/or may result in unsatisfactory print quality. Our warranty coverage does not apply to any problem that is caused by the use of unauthorized third party toner and/or cartridge. To protect your investment and obtain premium performance from the Brother machine, we strongly recommend the use of Genuine Brother Supplies.
    
  • Wait to unpack the toner cartridge until immediately before you put it in the machine. If a toner cartridge is left unpacked for a long time, the toner life will be shortened.
    
  • Handle the toner cartridge carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once.
    
  • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.

  

  4. Unpack the new toner cartridge. Hold the cartridge level with both hands and gently rock it from side to side five or six times to spread the toner evenly inside the cartridge.

  

  5. Pull off the protective cover.

  

  6. Put the new toner cartridge firmly into the drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically.

  Make sure that you put in the toner cartridge properly or it may separate from the drum unit.

  

  7. Clean the primary corona wire inside the drum unit by gently sliding the green tab from right to left and left to right several times.

  Be sure to return the green tab to the home position (1). If you do not, printed pages may have a vertical stripe.

  

  8. Put the drum unit and toner cartridge assembly back in the machine.

  

  9. Close the front cover.